
Cemimax A2000
Very high strength for resilient floor coverings
Dispersion adhesive for resilient synthetic floor and wall coverings in interior areas.
Products Features and Benefits
- Stable quality Bonding, layer has durable resilience
- Good water resistance, excellent bonding strength
- Very high initial tack and final bonding strength
- Easy application, high coverage rate
-
Low VOC
Technical Data
(Under normal conditions at 20℃.)
- Packaging: 5kg,25kg Plastic drum
- Shelf-life: Min. 12 months
- Colour: Cream-white
- Working temperature: +5°C - 35°C
- Consumption: 3.75m²/1 Litres
- Open time: 5-30 minutes
- Working time: 1-2 hours
- Set to traffic: After 24-48 hours
- Final strength: After 5-7 days
Limitations and Important Notes
The product should be protected against frost and direct light during transportation, storage and application. Application temperature should not be lower than 5℃.
Suitable Substrate Conditions
Rubber flooring sheet, PVC sport flooring sheet, vinyl tile and cushioned vinyl coverings, including those with textile fleece backings.
Application
- Allow primers and smoothing compounds to dry thoroughly. Refer to the product Data Sheet for the products used.
-
Stir thoroughly the product before use, Apply it evenly on the surface of substrate by using A2 or A3 toothed trowel. After short open tine of 5-30 min. the substrate is ready to accept above flooring material.
-
After the flooring material is applied on the substrate rub the surface by wood plate or roll by roller to remove entranced air under the flooring material. Make sure that the adhesive has transferred to the back of the
flooring material.
-
The adhesive will be dried after 24h, and set to foot traffic after 48h.