Cemimax A600

Cemimax A600

Cemimax A600 is a waterbased dispersion adhesive for linoleum floor coverings on absorbent substrates. Wet adhesives with short drying time.For interior use.

Product Data Sheet Safety Data Sheet

Products Features and Benefits

  • Very high initial tack and final bonding strength
  • Bonding layer has durable resilience
  • Low drying time
  • Solvent free
  • Low VOC

Technical Data

(Under normal conditions at 20℃.)

  • Packaging: 20kg/10kg/5kg Plastic drum
  • Shelf-life: Min. 12 months
  • Colour: Cream-white
  • Working temperature: +5°C - 35°C
  • Consumption: 3.75m²/1 Litres
  • Drying time: 30 minutes
  • Set to traffic: After 24 hours
  • Final strength: After 3 days Open time: 5-30mins

Limitations and Important Notes

The product should be protected against frost and direct light during transportation, storage and application. Application temperature should not be lower than 5℃.

Suitable Substrate Conditions

Linoleum floor coverings in sheets and panels in residential and commercial areas.

Application

  • Allow primers and smoothing compounds to dry thoroughly. Refer to the product Data Sheet for the products used.
  • Stir thoroughly the product before use, Apply it evenly on the surface of substrate by using B1 toothed trowel. After short open time of 20-40 min. the substrate is ready to accept above flooring material.

  • Lay the covering on the full surface. rolling with 50kg roll over the covering to ensure removal of residual air. Make sure that the adhesive has transferred to the back of the flooring material.

  • The adhesive will be dried after 24h, and set to foot traffic after 48h.