Cemimax A710

Cemimax A710

Cemimax A710 is a 2 component polyurethane adhesive for rubber floor and heavy-duty floor coverings

Cemimax A710 is a 2 component polyurethane adhesive has very high dimensional stability even with special covering materials. highest bond-strength, therefore extremely reliable for (almost) rubber And any loading, therefore universal applications in interior areas.

Product Data Sheet Safety Data Sheet

Products Features and Benefits

  • no shrinkage
  • extremely high final strength
  • high resistance to heat and cold
  • interior and conditional exterior use
  • solvent-free

Technical Data

(Under normal conditions at 20℃.)

  • Packaging: 12kg+2.5kg set Plastic drum
  • Shelf-life: Min. 12 months
  • Colour: Brownish
  • Working temperature: Min. 15℃ at floor level
  • Consumption: 300-500 g/㎡ by A2-3,400-600g/㎡ by B1-2 Pot life 40 minutes
  • Working time: /
  • Set to traffic: After 24 hours
  • Final strength: After 5-7 days

Limitations and Important Notes

The product should be protected against frost and direct light during transportation, storage and application. Application temperature should not be lower than 5℃.

Suitable Substrate Conditions

  • Rubber floors thickness up to 10cm
  • Rubber granulate or underlays
  • PVC design floor coverings
  • luxury vinyl tiles
  • linoleum
  • sports-halls, industrial and heavy wear locations

Application

  • Allow primers and smoothing compounds to dry thoroughly. Refer to the product Data Sheet for the products used.
  • Pour the hardner component B into vat component A and mixing carefully, pour the mixed material into a clean empty barrel to continue the mixing.
  • Apply it evenly on the surface of substrate by using A2 or A3(B1 or B2) toothed trowel. After covering time of 2-3 hours the floor again.
  • The adhesive will be dried after 24h, and set to foot traffic after 48h