Concrete Restoration Systems

Cemi Screed Max
Screedmax is a special high-performance composite dry powder mortar product for quick-drying and early-strength screed.. This product is mainly suitable for subfloor backfill screed. It has the advantages of convenient on-site construction, fast drying speed (4 days), high drying strength, low shrinkage, etc. It is very suitable for backfilling of old ground renovation mortar. Urgently, there are construction sites with higher strength requirements for backfill leveling mortar layer, which can meet the construction requirements with high requirements and short construction period.

Cemi Screed Light
Cemi screed light is a high performance light weight mortar with flow ability suitable for fast dry engineered screed installation. It is made by using high quality polymer spray dry powder resin, special cement, fine aggregates and special additives. Applying specialised research and development technology, processing and refinement in the factory. Easy to use light weight formula can be used as a bulk fill and self levelling compound. For all large scale commercial works and renovations to existing slabs where weight is a factor.

DL10
DL10 is an advanced cement and polymer based levelling compound with special aggregate. DL10 is formulated with high flow performance for leveling work on installation of thick layers. DL10 is very suitable for quick-setting preparation solutions and also can be used as a fast set screed with low ratio water mixing.

PP5
PP5 is an advanced cement and polymer mix that is highly versatile, rapid drying patching compound. Its fine aggregates allow it to be installed from a feather edge up to a high ll depth in one application. Superior bonding allows it to be applied over existing concrete, wellbonded ooring, properly prepared non-water soluble adhesive, wellbonded gypsum, all without having to use primer in most applications.

Hypermax Grout
Cemimax Hypermax is a multi purpose Construction Grout designed to provide high flexural and compressive strength performance. It is non-metallic, non-shrink, non-corrosive and contains no added chlorides.
Contact Us Today
Please use the form below to speak with us about our primers and moisture vapor retarders.