Cemimax DP70

Cemimax DP70

Cemimax DP70 is a Low emission, multi-purpose dispersion primer for exterior use

Dispersion Primer with a wide range of applications, for interior and exterior use, providing overlayment compound DL10 or DL59 is applied within drying time of primer. Not to be left exposed to the elements for more than 2 hours.

Product Data Sheet Safety Data Sheet

Products Features and Benefits

  • Ready to use
  • Excellent bond
  • Rapid drying
  • High coverage
  • Solvent-free
  • Suitable for exterior use

Technical Data

(Under normal conditions at 20°c)

  • Packaging: Plastic bucket
  • Packsize: 20 kg, 5 kg
  • Shelf-life: 12 months
  • Working temperature: +5°C - 35°C
  • Consumption: Approx. 12m2 /1 Litre
  • Drying time: 4-6 hours Touch Dry: 15-20mins

Limitations and Important Notes

  • The product should be protected against frost and direct light during transportation, storage and application. Application temperature should not be lower than 5℃.
  • Binders: Modified styrene-acrylate copolymers, wetting- and defoaming-agents, preservatives and water.

Suitable Substrate Conditions

Use on surfaces with well-bonded, waterproof adhesive and smoothing compound residues.

Application

  • The surface should be clean, dry, and strong without coosepart loose layer should be completely removed by granulator, and the substrate should be cleaned thoroughly.
  • The product can be diluted with water. The water proportion base on the substrate situation.(note: if the existing substrate is ceramic tile, it shall not be diluted.)
  • Apply the primer evenly to fully cover the surface using a fine-pored foam roller.
  • Drying times: allow to dry to a clear, transparent, almost tack-free film. Dependant upon floor temperature and humidity, In favourable climatic conditions and on absorbent surfaces, a drying time of 1-3 hours is normally adequate.